Industrial service

VFD and Motor Control

Variable frequency drives give you speed control, soft starting, and energy savings, but only when they are set up and wired correctly. Ogun Factory Automation installs, programs, and troubleshoots VFD and motor control systems, including Delta and Yaskawa drives, so your motors start smoothly, run at the right speed, and stop faulting. When a drive throws a code and your line goes down, we find the real cause instead of just resetting it.

Call 954-798-5143 Request Service

Scope

What this service includes

Installation and wiring of VFDs for conveyors, pumps, fans, and process motors

Drive parameter setup and tuning for your specific motor and load

Troubleshooting of drive fault codes, overloads, and nuisance trips

Contactor and starter based motor control wiring and repair

Integration of drives with PLC, relay, and operator controls

Motor and drive matching so the drive is correctly sized for the job

Symptoms

Problems we fix

A VFD that keeps tripping on overcurrent, overvoltage, or overheat faults

A motor that starts hard, hums, or will not reach the speed you set

A drive that was replaced but never programmed for your motor and load

Speed control that has become erratic or unresponsive

A conveyor or pump that needs variable speed added for better process control

How it works

Straightforward, from call to fix

Call

Reach out and tell us what is happening with your equipment. We listen, ask the right questions, and set up a visit that fits your production schedule.

Diagnose

We come out and find the real cause across electrical, controls, and mechanical systems using proper testing, then explain clearly what failed and what it will take to fix.

Fix and follow up

We complete the repair or installation, test it before we leave, and check back to make sure your equipment is running the way it should.

Go deeper

Guides and local pages for vfd and motor control

Guide Why a VFD keeps tripping: common causes and what to check

Questions

Frequently asked

Do you work on Delta and Yaskawa drives?+

Yes. We wire and program common industrial VFD brands including Delta and Yaskawa, and we can assess other drives you have in service before quoting the work.

My drive keeps faulting. Can you find out why?+

That is exactly the kind of work we do. Repeated faults usually point to a real underlying issue in the motor, load, wiring, or parameters, and we diagnose the cause rather than just clearing the code.

Can a VFD save me energy?+

On the right application, running a motor at the speed the process actually needs instead of full speed all the time can reduce energy use. We can look at your load and tell you honestly whether a drive makes sense.

Safe and accountable

De-energize and lock out first

OSHA 10-Hour Construction Outreach trained and insured. Certificate of Insurance available on request.

We de-energize and lock out first, then verify absence of voltage before we work

OSHA 10-Hour Construction Outreach trained; PPE matched to each task

Emergency-stop and safety circuits built and tested to code

Platforms and brands we work with

DeltaYaskawaVictronABBWEGEatonLenze

Need vfd and motor control?

Serving Palm Beach and Broward counties, including Greenacres, West Palm Beach, Lake Worth, Boynton Beach, Boca Raton, Fort Lauderdale.

Call 954-798-5143 Text Request Service